Pacific Empire Samples 4.0 g/t Gold over 8.0 Metres in Trench at Jean Marie

Vancouver, British Columbia–(Newsfile Corp. – August 11, 2020) – Pacific Empire Minerals Corp. (TSXV: PEMC) (“Pacific Empire”, “PEMC” or the “Company”) is pleased to report assays received from its Jean Marie Copper-Gold-Silver-Molybdenum porphyry project (the “Jean Marie”) in north-central British Columbia, located 50 kilometres west of Centerra Gold Ltd.’s Mt. Milligan copper-gold mine.


  • Continuous chip sampling of hand trench 300 m south of the C zone yields 4.0 g/t gold over 8 metres, with the entire 20 metre length of trench averaging 1.7 g/t gold;
  • Rock sampling at A Zone includes 0.442 g/t gold and 1.3% copper; and
  • Rock sampling at C Zone includes 0.525 g/t gold and 1.1% copper.

An initial rock sampling program was completed on the Jean Marie for the purpose of evaluating the potential for gold in and around the historical drill-indicated copper zones. An area south of the C zone, where a 2008 rock sample along a road cut exhibited significant gold mineralization, was followed up with a 20 m hand excavated trench and systematically chip sampled over 2 metre intervals.

Anomalous gold results are associated with oxidized, locally semi-massive pyrite, arsenopyrite, and sporadic quartz-sulphide veinlets. Moderate to strong hematite, limonite and scorocite with localized jarosite comprise the oxides that are associated with gold mineralization. Further follow up is clearly warranted at this intriguing mineralized showing, both on the north and south side of the exposure at the road cut.

“We always believed there was potential for significant gold mineralization at Jean Marie and these initial results clearly support this. With a project of this scale, these results are a significant revelation for us and we will work to further expand and develop the potential for a gold-enriched copper deposit on this project,” commented Pacific Empire’s President and CEO, Brad Peters. “As we progress towards drilling in the fall it is encouraging to uncover new mineralized areas concealed beneath shallow cover, at surface.”

Table 1. Continuous chip sampling results from hand trench south of C zone (start of trench at 377,703 E / 6,106,027 N, end of trench at 377,721 E / 6,106,031 N, UTM NAD 83 zone 10).

From (m) To (m) Interval (m) Gold (g/t) Silver (g/t) Copper (ppm) Sample ID Sample type
0.0 2.0 2.0 0.017 0.43 268.5 2089957 Rock chip
2.0 4.0 2.0 0.281 0.25 340.7 2089958 Rock chip
4.0 6.0 2.0 0.033 0.12 108.5 2089959 Rock chip
6.0 8.0 2.0 0.009 0.06 55.7 2089960 Rock chip
8.0 10.0 2.0 0.159 0.11 139.3 2089961 Rock chip
10.0 12.0 2.0 2.706 0.29 270.7 2089962 Rock chip
12.0 14.0 2.0 0.773 0.23 275.4 2089963 Rock chip
14.0 16.0 2.0 3.968 0.68 438.9 2089964 Rock chip
16.0 18.0 2.0 8.679 1.37 508.3 2089965 Rock chip
18.0 20.0 2.0 0.031 0.04 34.6 2089966 Rock chip


Historically, the A and C zones did not see systematic analyses for gold. Entire hole composites from 1974 percussion holes were assayed for gold with a high detection limit and, as such, gold was not detected. The recent collected rock samples show that there is, in fact, a significant precious metal component associated with copper mineralization, at least in part, at the A and C zones.

Table 2. Rock sampling results from A and C zones (UTM NAD 83 zone 10).

Sample ID Easting (m) Northing (m) Copper (%) Gold (g/t) Silver (g/t) Area Source
2089951 374651 6108289 1.534 0.012 3.3 A zone Subcrop
2089952 374653 6108290 1.304 0.442 15.16 A zone Subcrop
2089953 377043 6106669 0.292 0.006 1.63 C zone west Outcrop
2089954 377043 6106669 0.418 0.046 6.79 C zone west Outcrop
2089955 377353 6106608 3.730 0.019 8.63 C zone Outcrop
2089956 377353 6106608 1.101 0.525 54.48 C zone Outcrop
2089967 377716 6106025 0.133 6.193 48.45 Road cut Subcrop


Cannot view this image? Visit:

Figure 1. Key map showing sampled areas with gold values relative to known historical zones at Jean Marie.

To view an enhanced version of Figure 1, please visit:

Cannot view this image? Visit:

Figure 2. Key map showing sampled areas with copper values relative to known historical zones at Jean Marie.

To view an enhanced version of Figure 2, please visit:

Cannot view this image? Visit:

Figure 3. Detailed map showing trench location and gold values at Jean Marie.

To view an enhanced version of Figure 3, please visit:

Cannot view this image? Visit:

Figure 4. Location map of Jean Marie property.

To view an enhanced version of Figure 4, please visit:

About the Jean Marie Project

The Jean Marie consists of 7,350 ha of contiguous mineral claims in north-central British Columbia situated 50 kilometres west of Centerra Gold Ltd.’s Mt. Milligan copper-gold mine. PEMC holds an option to earn a 100% interest in the Jean Marie. The Jean Marie straddles the contact between the Jean Marie multiphase stock and andesitic volcanics of the Late Triassic to Early Jurassic Witch Lake. Several drill-indicated zones exist on the Jean Marie, two of which have only been historically drilled to a maximum depth of 92 metres. Recent logging operations and associated infrastructure have made road-based drilling activities possible. The most recent drilling at any of the three drill indicated zones was completed at the B zone in 1997. The final hole of the 1997 program intersected 184 m @ 0.33% copper, which includes an interval of hydrothermal breccia grading 1.2% copper over 27 metres.** Numerous additional exploration targets exist on the Property, particularly along a 9 kilometre trend that extends southeasterly from the A zone.

** The Company has not verified historical drilling results but has reviewed the historical sampling and analytical procedures and has no reason to believe the historically reported results are unreliable or misleading.

QA/QC Procedures

Continuous chip samples and rock grab samples were collected and placed in polyethylene bags before being shipped to MS Analytical (“MSA”) in Langley, BC. Internal laboratory standards are checked upon analysis as a means of quality assurance. Samples were analyzed using MSA’s IMS-130 multi-element analytical package, whereby 0.5 g aliquots are subjected to an aqua-regia digest and subsequently analyzed with ICP-AES/MS. Sample were also assayed using MSA’s FAS-111 fire assay gold package, whereby a 30 g fusion is ultimately finished with AAS.

Qualified Person

Rory Ritchie, P.Geo., Vice President of Exploration for the Company, serves as a qualified person as defined by National Instrument 43-101 and has reviewed the scientific and technical information in this news release, approving the disclosure herein.

About Pacific Empire Minerals Corp.

PEMC is an exploration company based in Vancouver, British Columbia, that employs a “hybrid prospect generator” business model and trades on the TSX Venture Exchange under the symbol PEMC. The Company’s strong portfolio of projects is a result of continuous generative work conducted since the Company’s inception in 2012.

By integrating the project generator business model with low-cost RC drilling, the company intends to leverage its portfolio by identifying, and focusing on, the highest quality projects for partnerships and advancement.


“Brad Peters”
President and Chief Executive Officer
Pacific Empire Minerals Corp.
Tel: +1-604-356-6246
[email protected]

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Statements

Information set forth in this news release may involve forward-looking statements under applicable securities laws. Forward-looking statements are statements that relate to future, not past, events. In this context, forward-looking statements often address expected future business and financial performance, and often contain words such as “anticipate”, “believe”, “plan”, “estimate”, “expect”, and “intend”, statements that an action or event “may”, “might”, “could”, “should”, or “will” be taken or occur, or other similar expressions. All statements, other than statements of historical fact, included herein including, without limitation, are forward-looking statements. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors include, among others, the following risks: the need for additional financing; operational risks associated with mineral exploration; fluctuations in commodity prices; title matters; environmental liability claims and insurance; reliance on key personnel; the potential for conflicts of interest among certain officers, directors or promoters with certain other projects; the absence of dividends; competition; dilution; the volatility of our common share price and volume and the additional risks identified the management discussion and analysis section of our interim and most recent annual financial statement or other reports and filings with the TSX Venture Exchange and applicable Canadian securities regulations. Forward-looking statements are made based on management’s beliefs, estimates and opinions on the date that statements are made, and the Company undertakes no obligation to update forward-looking statements if these beliefs, estimates and opinions or other circumstances should change, except as required by applicable securities laws. Investors are cautioned against attributing undue certainty to forward-looking statements.

To view the source version of this press release, please visit

Comments are closed.

Free newsletter for stock pics, interview transcripts & investing ideas